Capacity range:
Up to530GPM(120m3/h)
Up to 115 PSI (0.8 MPa) |
Capacity range:
Up to 175 GPM (40m3/h)
Up to 115 PSI (0.8 MPa) |
Capacity range:
Up to 90 GPM (20m3/h)
Up to 90 PSI (0.6 MPa) |
The ABEL EM Metal is available in three material designs: ductile iron (SG), stainless steel (ED), or aluminium (AL).
By properly matching the selection of fluid compatible materials in membranes, check balls, and valve seats, an optimal material combination is realized that produces customer satisfaction.
Water and sewage industry
Ceramic industry
Land drainage
Marble and stone plants
Navigation, offshore
Automobile industry
Mechanical engineering
Fire-fighting
Paper industry
Mining engineering
Lacquer and paint industry
|
In the chemical industry and critical areas of process technology, aggressive fluids require the use of high quality plastic construction for wetted components. ABEL EM Plastic offers polypropylene (PP), PVDF (PV), or PTFE (PT).
Corrosion protection is also available for the non-wetted side of the pump, as well as explosion proof motors, and VFD control.
Chemical industry
Pharmaceutical industry
Refineries
Power plants
|
With ABEL EM Food the stainless steel design (EF) is compliant with food industry standards.
The internal design of this technology is optimized through elimination of dead spaces for optimal flow. Rinsing and cleaning procedures correspond to CIP and SIP requirements.
All product-contacting materials, such as membranes, balls, and seats are available in FDA approved materials.
ABEL offers a variety of accessories that offer safety, ease of operation, and flow control.
Brewing beverage industry
Food industry
|
